Profile: Wright Medical Technology, Inc. is a global orthopaedic medical device company. Our Advance® Uni-Knee renders normal motion and leads to a longer implant life that delays or prevents the need for total knee replacement. Our Advance® medial-pivot knee helps to replicate the rotating, twisting, bending, flexion and stability of a natural knee. Our Rayhack® system consists of procedure specific bone-cutting guides and fixation plates that allow precise shortening and repositioning of the radius and ulna, the two major bones of the forearm. Our Pro-Dense® injectable graft is a synthetic biomaterial that combines the bone-forming capabilities of calcium sulfate with calcium phosphate. Our Graftjacket® Regenerative Tissue Matrix acts as a template or scaffold for the body to work with to help repair itself ultimately converting to the patient's host tissue.

The company was founded in 1950, has revenues of USD 100-500 Million, has ~1000 employees and is ISO 9002, ISO 9003, CE certified. NASDAQ:WMGI (SEC Filings)

FDA Registration Number: 3012429289

201 to 250 of 251 Products/Services (Click for related suppliers)  Page: 1 2 3 4 [5] 6

• Soft Rib Fracture Orthosis (FDA Code: IPX / 890.3490) A truncal orthosis is a device intended for medical purposes to support or to immobilize fractures, strains, or sprains of the neck or trunk of the body. Examples of truncal orthoses are the following: Abdominal, cervical, cervical-thoracic, lumbar, lumbo-sacral, rib fracture, sacroiliac, and thoracic orthoses and clavicle splints.

• Soft Tissue Non-Biodegradable Fixation Fastener (FDA Code: MBI / 888.3040) A smooth or threaded metallic bone fixation fastener is a device intended to be implanted that consists of a stiff wire segment or rod made of alloys, such as cobalt-chromium-molybdenum and stainless steel, and that may be smooth on the outside, fully or partially threaded, straight or U-shaped; and may be either blunt pointed, sharp pointed, or have a formed, slotted head on the end. It may be used for fixation of bone fractures, for bone reconstructions, as a guide pin for insertion of other implants, or it may be implanted through the skin so that a pulling force (traction) may be applied to the skeletal system.

• Spinal Interlaminal Fixation Accessories (FDA Code: LYP / 888.3050) A spinal interlaminal fixation orthosis is a device intended to be implanted made of an alloy, such as stainless steel, that consists of various hooks and a posteriorly placed compression or distraction rod. The device is implanted, usually across three adjacent vertebrae, to straighten and immobilize the spine to allow bone grafts to unite and fuse the vertebrae together. The device is used primarily in the treatment of scoliosis (a lateral curvature of the spine), but it also may be used in the treatment of fracture or dislocation of the spine, grades 3 and 4 of spondylolisthesis (a dislocation of the spinal column), and lower back syndrome.

• Spinal Interlaminal Fixation Appliance (FDA Code: KWP / 888.3050)

• Spinal Vertebral Body Replacement Device (FDA Code: MQP / 888.3060) A spinal intervertebral body fixation orthosis is a device intended to be implanted made of titanium. It consists of various vertebral plates that are punched into each of a series of vertebral bodies. An eye-type screw is inserted in a hole in the center of each of the plates. A braided cable is threaded through each eye-type screw. The cable is tightened with a tension device and it is fastened or crimped at each eye-type screw. The device is used to apply force to a series of vertebrae to correct "sway back," scoliosis (lateral curvature of the spine), or other conditions.

• Spondylolisthesis Spinal Fixation Orthosis (FDA Code: MNH / 888.3070) Pedicle screw spinal systems are multiple component devices, made from a variety of materials, including alloys such as 316L stainless steel, 316LVM stainless steel, 22Cr-13Ni-5Mn stainless steel, Ti-6Al-4V, and unalloyed titanium, that allow the surgeon to build an implant system to fit the patient's anatomical and physiological requirements. Such a spinal implant assembly consists of a combination of anchors (e.g., bolts, hooks, and/or screws); interconnection mechanisms incorporating nuts, screws, sleeves, or bolts; longitudinal members (e.g., plates, rods, and/or plate/rod combinations); and/or transverse connectors.

• Stabilized Total Knee Systems

• Stable Femoral Components

• Strain Gauged Bone Staples

• Surgical Bit (FDA Code: GFG / 878.4820) Surgical instrument motors and accessories are AC-powered, battery-powered, or air-powered devices intended for use during surgical procedures to provide power to operate various accessories or attachments to cut hard tissue or bone and soft tissue. Accessories or attachments may include a bur, chisel (osteotome), dermabrasion brush, dermatome, drill bit, hammerhead, pin driver, and saw blade.

• Surgical Bone Staples

• Surgical Instrument Tray (FDA Code: FSM / 878.4800) A manual surgical instrument for general use is a nonpowered, hand-held, or hand-manipulated device, either reusable or disposable, intended to be used in various general surgical procedures. The device includes the applicator, clip applier, biopsy brush, manual dermabrasion brush, scrub brush, cannula, ligature carrier, chisel, clamp, contractor, curette, cutter, dissector, elevator, skin graft expander, file, forceps, gouge, instrument guide, needle guide, hammer, hemostat, amputation hook, ligature passing and knot-tying instrument, knife, blood lancet, mallet, disposable or reusable aspiration and injection needle, disposable or reusable suturing needle, osteotome, pliers, rasp, retainer, retractor, saw, scalpel blade, scalpel handle, one-piece scalpel, snare, spatula, stapler, disposable or reusable stripper, stylet, suturing apparatus for the stomach and intestine, measuring tape, and calipers. A surgical instrument that has specialized uses in a specific medical specialty is classified in separate regulations in parts 868 through 892.

• Surgical Knife (FDA Code: EMF / 878.4800)

• Surgical Orthopedic Scissors (FDA Code: HRR / 888.4540) An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery. This generic type of device includes the cerclage applier, awl, bender, drill brace, broach, burr, corkscrew, countersink, pin crimper, wire cutter, prosthesis driver, extractor, file, fork, needle holder, impactor, bending or contouring instrument, compression instrument, passer, socket positioner, probe, femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench.

• Surgical Pliers (FDA Code: HTC / 878.4800)

• Surgical Retractor (FDA Code: GAD / 878.4800)

• Surgical Retractor Systems (FDA Code: GAD / 878.4800)

• Surgical Stripper (FDA Code: HRT / 888.4540)

• Surgical Trays (FDA Code: LRP / 878.4800)

• Surgical Trays (FDA Code: LRP / 878.4800)

• Suture Retention Device (FDA Code: KGS / 878.4930) A suture retention device is a device, such as a retention bridge, a surgical button, or a suture bolster, intended to aid wound healing by distributing suture tension over a larger area in the patient.

• Synthetic Bone Graft

• Synthetic Bone Graft Substitute Granules

• Tamps (FDA Code: HXG / 888.4540)

• Templates (FDA Code: HWT / 888.4800) A template for clinical use is a device that consists of a pattern or guide intended for medical purposes, such as selecting or positioning orthopedic implants or guiding the marking of tissue before cutting.

• Temporal Tendon Implants

• Tendon Implants

• Threaded Fixation Pin (FDA Code: JDW / 888.3040)

• Tibial Inserts

• Tibial Intra Meduallary Nails

• Titanium carbon Finger joint Implant

• Titanium Carpal Lunate Implants

• Titanium Carpal Scaphoid Implants

• Titanium Radial Head Implants

• Total Knee Prosthesis

• Total Knee Systems

• Total Shoulder Prosthesis System

• Total Shoulder Systems

• Traction Head Halter (FDA Code: HSS / 888.5890) A noninvasive traction component is a device, such as a head halter, pelvic belt, or a traction splint, that does not penetrate the skin and is intended to assist in connecting a patient to a traction apparatus so that a therapeutic pulling force may be applied to the patient's body.

• Traction Splint (FDA Code: HSP / 888.5890)

• Traditional Bone Cements

• U Shape Bone Staples

• Ulnar Hemi- Wrist Prosthesis (FDA Code: KXE / 888.3810) A wrist joint ulnar (hemi-wrist) polymer prosthesis is a mushroom-shaped device made of a medical grade silicone elastomer or ultra-high molecular weight polyethylene intended to be implanted into the intramedullary canal of the bone and held in place by a suture. Its purpose is to cover the resected end of the distal ulna to control bone overgrowth and to provide an articular surface for the radius and carpus.

• Ultrasonic Bone Cement Remover

• Uncemented Metal/Polymer Semi-Constrained Hip Prosthesis (FDA Code: LWJ / 888.3360) A hip joint femoral (hemi-hip) metallic cemented or uncemented prosthesis is a device intended to be implanted to replace a portion of the hip joint. This generic type of device includes prostheses that have a femoral component made of alloys, such as cobalt-chromium-molybdenum. This generic type of device includes designs which are intended to be fixed to the bone with bone cement (888.3027) as well as designs which have large window-like holes in the stem of the device and which are intended for use without bone cement. However, in these latter designs, fixation of the device is not achieved by means of bone ingrowth.

• Uncemented, Cemented Or Non-Porous Metal/Ceramic/Polymer Semi-Constrained Hip Prosthesis (FDA Code: LZO / 888.3353) A hip joint metal/ceramic/polymer semi-constrained cemented or nonporous uncemented prosthesis is a device intended to be implanted to replace a hip joint. This device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. The two-part femoral component consists of a femoral stem made of alloys to be fixed in the intramedullary canal of the femur by impaction with or without use of bone cement. The proximal end of the femoral stem is tapered with a surface that ensures positive locking with the spherical ceramic (aluminium oxide, A1203) head of the femoral component. The acetabular component is made of ultra-high molecular weight polyethylene or ultra-high molecular weight polyethylene reinforced with nonporous metal alloys, and used with or without bone cement.

• vacuum Bone Cement Mixing Systems

• Wire Holding Forceps (FDA Code: HYA / 878.4800)

• Wire Twisters (FDA Code: HXS / 888.4540)

• Wrench (FDA Code: HXC / 888.4540)