A Gasket is a mechanical seal that fills the space between two objects, generally to prevent leakage between the two objects while under compression. Gaskets save money by allowing less precise mating surfaces on machine parts which can use a gasket to fill irregularities. Gaskets are commonly produced by cutting from sheet materials, such as gasket paper, rubber, silicone, metal, cork, felt, neoprene, fiberglass, or a plastic polymer (such as polychlorotrifluoroethylene). Gaskets for specific applications may contain asbestos. It is usually desirable that the gasket be made from a material that is to some degree compressible such that it tightly fills the space it is designed for, including any slight irregularities. Industrial gasket withstand high compressive loads. Most industrial gasket applications involve bolts exerting compression well into the 14 MPa (2000 psi) range or higher. There are several ways to measure a gasket material's ability to withstand compressive loading. The 'hot compression test' is probably the most accepted of these. Most manufacturers of gasket materials will provide or publish these results.

Seat Cushions & Wedges are available in durable blue poplin or black vinyl-covered models. It features 3-inch foam to relieve pressure. Seat wedge is tapered to assist in proper lumbar positioning.