9 Products/Services (Click for related suppliers)
|• (FDA Code: BSJ / 868.5550)|
An anesthetic gas mask is a device, usually made of conductive rubber, that is positioned over a patient's nose or mouth to direct anesthetic gases to the upper airway.
|• (FDA Code: CAH / 868.5260)|
A breathing circuit bacterial filter is a device that is intended to remove microbiological and particulate matter from the gases in the breathing circuit.
|• (FDA Code: JAY / 868.5280)|
A breathing tube support is a device that is intended to support and anchor a patient's breathing tube(s).
|• (FDA Code: CBL / 868.5300)|
A carbon dioxide absorbent is a device intended for medical purposes that consists of an absorbent material (e.g., soda lime) that is intended to remove carbon dioxide from the gases in the breathing circuit.
|• (FDA Code: BSF / 868.5310)|
A carbon dioxide absorber is a device that is intended for medical purposes and that is used in a breathing circuit as a container for carbon dioxide absorbent. It may include a canister and water drain.
|• (FDA Code: BZA / 868.5810)|
An airway connector is a device intended to connect a breathing gas source to a tracheal tube, tracheostomy tube, or mask.
|• (FDA Code: BYD / 868.5375)|
A heat and moisture condenser (artificial nose) is a device intended to be positioned over a tracheotomy (a surgically created opening in the throat) or tracheal tube (a tube inserted into the trachea) to warm and humidify gases breathed in by a patient.
|• (FDA Code: BZO / 868.5975)|
Ventilator tubing is a device intended for use as a conduit for gases between a ventilator and a patient during ventilation of the patient.
|• (FDA Code: CAI / 868.5240)|
An anesthesia breathing circuit is a device that is intended to administer medical gases to a patient during anesthesia. It provides both an inhalation and exhalation route and may include a connector, adaptor, and Y-piece.