Profile: Cardinal Health 303, Inc. offers blood transfusion sets, oximeters and peristaltic infusion pumps.
FDA Registration Number: 2016493
21 Products/Services (Click for related suppliers)
|
| • Anesthesia Table and Tray Cabinet (FDA Code: BRY / 868.6100) An anesthetic cabinet, table, or tray is a device intended to store anesthetic equipment and drugs. The device is usually constructed to eliminate build-up of static electrical charges. |
| • Anesthetic Infusion Pump (FDA Code: FRN / 880.5725) An infusion pump is a device used in a health care facility to pump fluids into a patient in a controlled manner. The device may use a piston pump, a roller pump, or a peristaltic pump and may be powered electrically or mechanically. The device may also operate using a constant force to propel the fluid through a narrow tube which determines the flow rate. The device may include means to detect a fault condition, such as air in, or blockage of, the infusion line and to activate an alarm. |
| • Blood Bank Software (FDA Code: MMH / 864.9175) An automated blood grouping and antibody test system is a device used to group erythrocytes (red blood cells) and to detect antibodies to blood group antigens. |
| • Blood Transfusion Sets (FDA Code: BRZ / 880.5440) An intravascular administration set is a device used to administer fluids from a container to a patient's vascular system through a needle or catheter inserted into a vein. The device may include the needle or catheter, tubing, a flow regulator, a drip chamber, an infusion line filter, an I.V. set stopcock, fluid delivery tubing, connectors between parts of the set, a side tube with a cap to serve as an injection site, and a hollow spike to penetrate and connect the tubing to an I.V. bag or other infusion fluid container. |
| • Continuous Electronic Thermometer (FDA Code: FLL / 880.2910) A clinical electronic thermometer is a device used to measure the body temperature of a patient by means of a transducer coupled with an electronic signal amplification, conditioning, and display unit. The transducer may be in a detachable probe with or without a disposable cover. |
| • Data Processing Module for Clinical use (FDA Code: JQP / 862.2100) A calculator/data processing module for clinical use is an electronic device intended to store, retrieve, and process laboratory data. |
| • Elastomeric Infusion Pump (FDA Code: MEB / 880.5725) |
| • Enteral Infusion Pump (FDA Code: LZH / 880.5725) |
| • Gaseous Phase Carbon-Dioxide Gas Analyzer (FDA Code: CCK / 868.1400) A carbon dioxide gas analyzer is a device intended to measure the concentration of carbon dioxide in a gas mixture to aid in determining the patient's ventilatory, circulatory, and metabolic status. The device may use techniques such as chemical titration, absorption of infrared radiation, gas chromatography, or mass spectrometry. |
| • Gravity Flow Infusion Monitor (FDA Code: FLN / 880.2420) An electronic monitor for gravity flow infusion systems is a device used to monitor the amount of fluid being infused into a patient. The device consists of an electronic transducer and equipment for signal amplification, conditioning, and display. |
| • I.V. Fluid Transfer Unit (FDA Code: LHI / 880.5440) |
| • Infusion Line Filter (FDA Code: FPB / 880.5440) |
| • Infusion Pump Accessories (FDA Code: MRZ / 880.5725) |
| • Intravenous Administration Kit (FDA Code: FPA / 880.5440) |
| • Non-Invasive Blood-Pressure Measurement System (FDA Code: DXN / 870.1130) A noninvasive blood pressure measurement system is a device that provides a signal from which systolic, diastolic, mean, or any combination of the three pressures can be derived through the use of tranducers placed on the surface of the body. |
| • Oximeters (FDA Code: DQA / 870.2700) An oximeter is a device used to transmit radiation at a known wavelength(s) through blood and to measure the blood oxygen saturation based on the amount of reflected or scattered radiation. It may be used alone or in conjunction with a fiberoptic oximeter catheter. |
| • Oximeters |
| • Patient Controlled Analgesia (PCA) Infusion Pump (FDA Code: MEA / 880.5725) |
| • Peristaltic Infusion Pump (FDA Code: FRN / 880.5725) |
| • Piston Syringe (FDA Code: FMF / 880.5860) A piston syringe is a device intended for medical purposes that consists of a calibrated hollow barrel and a movable plunger. At one end of the barrel there is a male connector (nozzle) for fitting the female connector (hub) of a hypodermic single lumen needle. The device is used to inject fluids into, or withdraw fluids from, the body. |
| • Stopcock, I.V.Set (FDA Code: FMG / 880.5440) |