Biomet, Inc

Address: PO Box 587, Warsaw, Indiana 46581-0587, USA
Phone: +1-(574)-267-6639 | Map/Directions >>

Profile: Biomet, Inc designs and manufactures products for hip replacement, knee replacement, shoulder replacement, elbow replacement & other small joint replacements. We are an ISO 9001 CE certified company. We offer products like joint replacement, sports medicine & dental implants. We encourage you to talk to your doctor about options that could help you get back to living and keep you active. If you have suffered from a sports related or other injury, we can help. Sports knee injuries and the available treatment options is the first step to making an informed decision about your healthcare and your quality of life. Our recommendation is to see an orthopedic physician who, after an examination, can give you the appropriate treatment options for your medical condition. Our Repicci II® implant system resurfaces only the damaged section of cartilage, thus saving a healthy cartilage. Our BioSymMetRic™ PIP fixator is a device that uses pins placed through the finger bone to stabilize complex finger fractures.

The company was founded in 1977, has revenues of > USD 1 Billion, has ~20 employees and is ISO 9001, CE certified. NASDAQ:BMET (SEC Filings)

FDA Registration Number: 1825034

1 to 50 of 628 Products/Services (Click for related suppliers)  Page: [1] 2 3 4 5 6 7 8 9 10 11 12 13 >> Next 50 Results
• 2 Part Metal-Plastic Articulation Wrist Prosthesis (FDA Code: JWI / 888.3800)
A wrist joint metal/polymer semi-constrained cemented prosthesis is a device intended to be implanted to replace a wrist joint. The device limits translation and rotation in one or more planes via the geometry of its articulating surfaces. It has no linkage across-the-joint. This generic type of device includes prostheses that have either a one-part radial component made of alloys, such as cobalt-chromium-molybdenum, with an ultra-high molecular weight polyethylene bearing surface, or a two-part radial component made of alloys and an ultra-high molecular weight polyethylene ball that is mounted on the radial component with a trunnion bearing. The metallic portion of the two-part radial component is inserted into the radius. These devices have a metacarpal component(s) made of alloys, such as cobalt-chromium-molybdenum. This generic type of device is limited to those prostheses intended for use with bone cement (888.3027).
• 3 Part Metal-Plastic-Metal Articulation Wrist Prosthesis (FDA Code: JWJ / 888.3800)
• Abdominal Belt
• Abdominal Binders (FDA Code: FSD / 880.5160)
• Abdominal Orthosis (FDA Code: KTD / 890.3490)
A truncal orthosis is a device intended for medical purposes to support or to immobilize fractures, strains, or sprains of the neck or trunk of the body. Examples of truncal orthoses are the following: Abdominal, cervical, cervical-thoracic, lumbar, lumbo-sacral, rib fracture, sacroiliac, and thoracic orthoses and clavicle splints.
• Abdominal Supports
• Absorbable Suture Anchors
• AC-Powered Motor Orthopedic Surgical Instrument (FDA Code: HWE / 878.4820)
Surgical instrument motors and accessories are AC-powered, battery-powered, or air-powered devices intended for use during surgical procedures to provide power to operate various accessories or attachments to cut hard tissue or bone and soft tissue. Accessories or attachments may include a bur, chisel (osteotome), dermabrasion brush, dermatome, drill bit, hammerhead, pin driver, and saw blade.
• AC-Powered Ophthalmic Electrolysis Unit (FDA Code: HRO / 886.4250)
An ophthalmic electrolysis unit is an AC-powered or battery-powered device intended to destroy ocular hair follicles by applying a galvanic electrical current.
• AC-Powered Portable Ward Use Suction Apparatus (FDA Code: JCX / 878.4780)
A powered suction pump is a portable, AC-powered or compressed air-powered device intended to be used to remove infectious materials from wounds or fluids from a patient's airway or respiratory support system. The device may be used during surgery in the operating room or at the patient's bedside. The device may include a microbial filter.
• Acetabular Components
• Acetabular Liners
• Acrylic Bone Cement
• Adhesive Elastic Bandage Tape
• Adjustable Back Support
• Adult Walkers & Accessories
• Allografts
• Alterable Preformed Skull Bone Plate (FDA Code: GWO / 882.5320)
A preformed alterable cranioplasty plate is a device that is implanted into a patient to repair a skull defect. It is constructed of a material, e.g., tantalum, that can be altered or reshaped at the time of surgery without changing the chemical behavior of the material.
• Alumina Acetabular Liners
• Amputation Knife (FDA Code: GDN / 878.4800)
A manual surgical instrument for general use is a nonpowered, hand-held, or hand-manipulated device, either reusable or disposable, intended to be used in various general surgical procedures. The device includes the applicator, clip applier, biopsy brush, manual dermabrasion brush, scrub brush, cannula, ligature carrier, chisel, clamp, contractor, curette, cutter, dissector, elevator, skin graft expander, file, forceps, gouge, instrument guide, needle guide, hammer, hemostat, amputation hook, ligature passing and knot-tying instrument, knife, blood lancet, mallet, disposable or reusable aspiration and injection needle, disposable or reusable suturing needle, osteotome, pliers, rasp, retainer, retractor, saw, scalpel blade, scalpel handle, one-piece scalpel, snare, spatula, stapler, disposable or reusable stripper, stylet, suturing apparatus for the stomach and intestine, measuring tape, and calipers. A surgical instrument that has specialized uses in a specific medical specialty is classified in separate regulations in parts 868 through 892.
• Amputation Saws
• Ankle & Foot Orthoses
• Ankle Arthrodesis Systems
• Ankle Implants Ankle Arthrodesis Systems
• Antibiotic Bone Cement (FDA Code: MBB / 888.3027)
Polymethylmethacrylate (PMMA) bone cement is a device intended to be implanted that is made from methylmethacrylate, polymethylmethacrylate, esters of methacrylic acid, or copolymers containing polymethylmethacrylate and polystyrene. The device is intended for use in arthroplastic procedures of the hip, knee, and other joints for the fixation of polymer or metallic prosthetic implants to living bone.
• Antibiotic Impregnated Bone Cement
• Arm & Shoulder Orthoses
• Arm Sling Immobilizer
• Arm Sling Strap Pads
• Arm Sling with Foam Strap
• Arm Slings (FDA Code: ILI / 890.3640)
An arm sling is a device intended for medical purposes to immobilize the arm, by means of a fabric band suspended from around the neck.
• Arm Support Extender:
• Arm Supports (FDA Code: IOY / 890.3475)
A limb orthosis (brace) is a device intended for medical purposes that is worn on the upper or lower extremities to support, to correct, or to prevent deformities or to align body structures for functional improvement. Examples of limb orthoses include the following: A whole limb and joint brace, a hand splint, an elastic stocking, a knee cage, and a corrective shoe.
• Arthrodesis Nails
• Arthroscopes (FDA Code: HRX / 888.1100)
An arthroscope is an electrically powered endoscope intended to make visible the interior of a joint. The arthroscope and accessories also is intended to perform surgery within a joint.
• Arthroscopy Instruments
• Assistive Kits, Walkers
• Automatic Wire Twisters
• Awl (FDA Code: HWJ / 888.4540)
An orthopedic manual surgical instrument is a nonpowered hand-held device intended for medical purposes to manipulate tissue, or for use with other devices in orthopedic surgery. This generic type of device includes the cerclage applier, awl, bender, drill brace, broach, burr, corkscrew, countersink, pin crimper, wire cutter, prosthesis driver, extractor, file, fork, needle holder, impactor, bending or contouring instrument, compression instrument, passer, socket positioner, probe, femoral neck punch, socket pusher, reamer, rongeur, scissors, screwdriver, bone skid, staple driver, bone screw starter, surgical stripper, tamp, bone tap, trephine, wire twister, and wrench.
• Back Exerciser
• Back Support Belt
• Back Support for Women
• Back Supports
• Back Supports Kits
• Bariatric Abdominal Binder
• Bariatric Walkers & Accessories
• Barrier Reusable Surgical Gowns
• Battery-Operated Invasive Electric Osteogenesis Stimulator (FDA Code: HTM)
• Bed Board (FDA Code: FPS / 880.6070)
A bed board is a device intended for medical purposes that consists of a stiff board used to increase the firmness of a bed.
• Bender (FDA Code: HXW / 888.4540)

 Edit or Enhance this Company (10919 potential buyers viewed listing,  1381 forwarded to manufacturer's website)
Browse Category   |   Alphabetical Products   |   ALL 25,000 Suppliers
HomeBuyAdd FREE ListingAdvertise Medical CompanyMedical Portal