Master Bond Inc.
Click Here To EMAIL INQUIRYContact: Dmitriy Zhitomirskiy - Online Marketing Manager
Phone: +1-(201)-343-8983 Fax: +1-(201)-343-2132
Address: 154 Hobart Street, Hackensack, New Jersey 07601, USA
E-Mail:
Web: http://www.masterbond.com
Profile
Inquiry ProductsMap/DirectionsAdhesives, Sealants and Coatings for Medical Devices
Master Bond manufactures adhesives, sealants, and coatings for the assembly of both disposable and reusable medical devices. Master Bond’s comprehensive line of over 3,000 formulations includes:
- One and two component epoxies
- Silicones
- Polyurethanes
- Cyanoacrylates
- UV curing adhesives
Custom Formulated Polymers for Advanced Medical Applications
Specific Master Bond grades of medical adhesives, sealants, coatings for medical devices offer the following features:
- Special formulations fully meet the USP Class VI protocol
- Compounds have been developed which offer high physical strength properties and outstanding chemical resistance even when applied on dissimilar or difficult to bond substrates.
- Selected products retain their desirable performance upon exposure to various sterilization procedures including autoclaving, radiation, ethylene oxide and the recently developed cold sterilants.
Most Popular Epoxies for Medical Device Assembly
| EP42HT-2MED | Room temperature curable USP Class VI certified epoxy for repeated sterilization including autoclaving. |
| EP41SMED | Rapid setting, USP Class VI epoxy system with superior resistance to chemical sterilization. |
| EP30MED | USP Class VI approved, low viscosity epoxy system with superb optical properties. |
| EP21TDCSMED | Silver conductive epoxy with low resistance and USP Class VI certification. |
| EP3HTMED | One component USP Class VI approved adhesive/sealant that resists elevated temperatures. Withstands repeated autoclaving. |
Typical Medical Applications for Master Bond Adhesive Products
Typical applications of Master Bond's adhesives, sealants, and coatings products for the medical industry include:
|
|
Groundbreaking Developments in Medical Device Adhesives
Master Bond has been very active in developing new Class VI type formulations for the medical device industry. These compounds can be used in a wide variety of devices such as diagnostic instruments (i.e. endoscopes), surgical tools, catheters, implantables, and more. They include:
EP30DPMed: A new USP Class VI approved product of particular interest. It is a flexible epoxy system with excellent bond strength and good flow for sealing and encapsulation.
EP45HTMed: This new USP Class VI approved formulation offers the ultimate in chemical and temperature resistance. It can withstand hundreds of autoclaving cycles.
MasterSil 151Med: This is an exciting new Class VI two-part addition cured silicone product. It has wide applicability as an adhesive for silicone type products and as an encapsulant or sealant for electronic devices.
Master Bond's skilled research and development team is committed to staying on the forefront of new technologies relevant to the medical device industry.
Master Bond offer a wide array of packaging options to speed productivity, minimize waste and save energy including:
- Quantities from grams to gallons
- Cans, bottles and jars
- Cartridges for manual and pneumatic guns
- Premixed and frozen syringes
- Bipaks for field service kit
Specialty Adhesives for Medical Device Manufacturing
<
Master Bond Inc. is a leader in the design, formulation and manufacture of adhesives, sealants, coatings and potting compounds for the assembly of both disposable and reusable medical devices. Master Bond's product line includes epoxies, urethanes, silicones, cyanoacylates, and specialty solvent based systems. These user friendly products can be cured at ambient and/or elevated temperatures or by exposure to UV light. Specific formulations fully meet the USP Class VI protocol. Master Bond's technical staff welcomes the opportunity to provide assistance to medical device manufacturers in the solution of specific assembly problems.
<
Master Bond adhesives, sealants, coatings and potting compounds can simplify and enhance the performance of many critical medical devices. Formulations have been developed which offer high physical strength properties and outstanding chemical resistance even when applied on dissimilar or difficult-to-bond materials. Additionally, selected products retain their desirable performance upon exposure to various sterilization procedures including autoclaving, radiation, ethylene oxide and the recently developed cold sterilants. Master Bond designs specific adhesive
systems that cover the entire range of technical requirements for medical device manufacturing.
comprehensive line | medical adhesives | EP42HT-2MED | EP41SMED | EP30MED | EP21TDCSMED | EP3HTMED | EP30DPMed | EP45HTMed | MasterSil 151Med | packaging options | potting compounds |
CONTACT US
EDIT LISTING
LINK TO US
