A  B  C  D  E  F  G  H  I  J  K  L  M  N  O  P  Q  R  S  T  U  V  W  X  Y  Z  FDA Codes
MEDICAL products beginning with : E
51 to 100 of 2376 results  Page: << Previous 50 Results 1 [2] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> Next 50 Results
 PRODUCT NAMEFDA Code/Regulation 
Electro-Acupuncture Stimulator (16 suppliers)BWK
Electro-Optical(For Cervical Cancer) Sensor (3 suppliers)MWM
Electroanesthesia Apparatus (1 supplier)

Identification. An electroanesthesia apparatus is a device used for the induction and maintenance of anesthesia during surgical procedures by means of an alternating or pulsed electric current that is passed through electrodes fixed to a patient's head.

Classification. Class III (premarket approval).

BWL / 868.5400
Electrocardiograph (108 suppliers)

Identification. An electrocardiograph is a device used to process the electrical signal transmitted through two or more electrocardiograph electrodes and to produce a visual display of the electrical signal produced by the heart.

Classification. Class II (performance standards).

DPS / 870.2340
Electrocardiograph Electrode (74 suppliers)

Identification. An electrocardiograph electrode is the electrical conductor which is applied to the surface of the body to transmit the electrical signal at the body surface to a processor that produces an electrocardiogram or vectorcardiogram.

Classification. Class II (performance standards).

DRX / 870.2360
Electrocardiograph Lead Switching Adaptor (2 suppliers)

Identification. An electrocardiograph lead switching adaptor is a passive switching device to which electrocardiograph limb and chest leads may be attached. This device is used to connect various combinations of limb and chest leads to the output terminals in order to create standard lead combinations such as leads I, II, and III.

Classification. Class II (performance standards).

DRW / 870.2350
Electrocardiograph Surface Electrode Tester (4 suppliers)

Identification. An electrocardiograph surface electrode tester is a device used to test the function and application of electrocardiograph electrodes.

Classification. Class II (performance standards).

KRC / 870.2370
Electrocardiograph Transmitter/Receiver System (47 suppliers)

Identification. A telephone electrocardiograph transmitter and receiver is a device used to condition an electrocardiograph signal so that it can be transmitted via a telephone line to another location. This device also includes a receiver that reconditions the received signal into its original format so that it can be displayed. The device includes devices used to transmit and receive pacemaker signals.

Classification. Class II (performance standards).

DXH / 870.2920
Electroconductive Media (32 suppliers)

Identification. Electroconductive media are the conductive creams or gels used with external electrodes to reduce the impedance (resistance to alternating current) of the contact between the electrode surface and the skin.

Classification. Class II (performance standards).

GYB / 882.1275
Electroconvulsive Therapy Device (8 suppliers)

Identification. An electroconvulsive therapy device is a device used for treating severe psychiatric disturbances (e.g., severe depression) by inducing in the patient a major motor seizure by applying a brief intense electrical current to the patient's head.

Classification. Class III (premarket approval).

GXC / 882.5940
Electrode Cables (95 suppliers)

Identification. An electrode cable is a device composed of strands of insulated electrical conductors laid together around a central core and intended for medical purposes to connect an electrode from a patient to a diagnostic machine.

Classification. Class II (special controls). The special controls consist of:

IKD / 890.1175
Electrode Recording Catheter (27 suppliers)

Identification. An electrode recording catheter or an electrode recording probe is a device used to detect an intracardiac electrocardiogram, or to detect cardiac output or left-to-right heart shunts. The device may be unipolar or multipolar for electrocardiogram detection, or may be a platinum-tipped catheter which senses the presence of a special indicator for cardiac output or left-to-right heart shunt determinations.

Classification. Class II (performance standards).

DRF / 870.1220
Electroencephalogram Signal Spectrum Analyzer (10 suppliers)

Identification. An electroencephalogram (EEG) signal spectrum analyzer is a device used to display the frequency content or power spectral density of the electroencephalogram (EEG) signal.

Classification. Class I (general controls).

GWS / 882.1420
Electroencephalograph Electrode/Lead Tester (5 suppliers)

Identification. An electroencephalograph electrode/lead tester is a device used for testing the impedance (resistance to alternating current) of the electrode and lead system of an electroencephalograph to assure that an adequate contact is made between the electrode and the skin.

Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in 882.9.

GYA / 882.1410
Electroencephalograph Test Signal Generator (3 suppliers)

Identification. An electroencephalograph test signal generator is a device used to test or calibrate an electroencephalograph.

Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in 882.9.

GWR / 882.1430
Electroencephalographs (94 suppliers)

Identification. An electroencephalograph is a device used to measure and record the electrical activity of the patient's brain obtained by placing two or more electrodes on the head.

Classification. Class II (performance standards).

GWQ / 882.1400
Electrogastrography System (3 suppliers)

Identification. An electrogastrography system (EGG) is a device used to measure gastric myoelectrical activity as an aid in the diagnosis of gastric motility disorders. The device system includes the external recorder, amplifier, skin electrodes, strip chart, cables, analytical software, and other accessories.

Classification. Class II (Special Controls). The special controls are as follows:

MYE / 876.1735
Electroglottograph (2 suppliers)

Identification. An electroglottograph is an AC-powered device that employs a pair of electrodes that are placed in contact with the skin on both sides of the larynx and held in place by a collar. It is intended to measure the electrical impedance of the larynx to aid in assessing the degree of closure of the vocal cords, confirm larygeal diagnosis, aid behavioral treatment of voice disorders, and aid research concerning the laryngeal mechanism.

Classification. Class II.

KLX / 874.1325
Electrohydraulic Lithotriptor (18 suppliers)

Identification. An electrohydraulic lithotriptor is an AC-powered device used to fragment urinary bladder stones. It consists of a high voltage source connected by a cable to a bipolar electrode that is introduced into the urinary bladder through a cystoscope. The electrode is held against the stone in a water-filled bladder and repeated electrical discharges between the two poles of the electrode cause electrohydraulic shock waves which disintegrate the stone.

Classification. Class II. The special control for this device is FDA's "Guidance for the Content of Premarket Notifications for Intracorporeal Lithotripters."

FFK / 876.4480
Electrolyte Control (23 suppliers)

Identification. A quality control material (assayed and unassayed) for clinical chemistry is a device intended for medical purposes for use in a test system to estimate test precision and to detect systematic analytical deviations that may arise from reagent or analytical instrument variation. A quality control material (assayed and unassayed) may be used for proficiency testing in interlaboratory surveys. This generic type of device includes controls (assayed and unassayed) for blood gases, electrolytes, enzymes, multianalytes (all kinds), single (specified) analytes, or urinalysis controls.

Classification. Class I (general controls). Except when used in donor screening tests, unassayed material is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to 862.9.

JJR / 862.1660
Electrolytic Decalcifier Device (2 suppliers)

Identification. Tissue processing equipment consists of devices used to prepare human tissue specimens for diagnostic histological examination by processing specimens through the various stages of decalcifying, infiltrating, sectioning, and mounting on microscope slides.

Classification. Class I (general controls). These devices are exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in 864.9. The devices are also exempt from the current good manufacturing practice requirements of the quality system regulation in part 820 of this chapter, with the exception of 820.180, with respect to general requirements concerning records, and 820.198, with respect to complaint files.

KDZ / 864.3010
Electromagnetic Radiation Blood Warmer (1 supplier)

Identification. A nonelectromagnetic blood and plasma warming device is a device that warms blood or plasma, by means other than electromagnetic radiation, prior to administration.

Classification. Class II (performance standards).

BSA / 864.9205
Electronic Depth Gauge (1 supplier)

Identification. Single/multiple component metallic bone fixation appliances and accessories are devices intended to be implanted consisting of one or more metallic components and their metallic fasteners. The devices contain a plate, a nail/plate combination, or a blade/plate combination that are made of alloys, such as cobalt-chromium-molybdenum, stainless steel, and titanium, that are intended to be held in position with fasteners, such as screws and nails, or bolts, nuts, and washers. These devices are used for fixation of fractures of the proximal or distal end of long bones, such as intracapsular, intertrochanteric, intercervical, supracondylar, or condylar fractures of the femur; for fusion of a joint; or for surgical procedures that involve cutting a bone. The devices may be implanted or attached through the skin so that a pulling force (traction) may be applied to the skeletal system.

Classification. Class II.

OOL / 888.3030
Electronic Metal Locator (2 suppliers)

Identification. An electronic metal locator is an AC-powered device with probes intended to locate metallic foreign bodies in the eye or eye socket.

Classification. Class II.

HPM / 886.4400
Electronic Noise Generator (2 suppliers)

Identification. An electronic noise generator for audiometric testing is a device that consists of a swept frequency generator, an amplifier, and an earphone. It is intended to introduce a masking noise into the non-test ear during an audiometric evaluation. The device minimizes the non-test ear's sensing of test tones and signals being generated for the ear being tested.

Classification. Class II.

ETS / 874.1120
Electronic Stethoscopes (64 suppliers)
Electronic Stethoscopes are digital devices that are ergonomically similar to traditional acoustic stethoscopes. Electronic stethoscopes are used with or without hearing aids. These stethoscopes are available for practitioners with reduced hearing acuity. Electronic stethoscopes are used for the transmission of audio output to pulmonologists and cardiologists. Electronic stethoscopes use a microphone to pick up sounds. These electronic stethoscopes provide improved sound amplification compared with mechanical stethoscopes and locate the cause of mechanical noises, air leaks and wind whistles.

Identification. A manual stethoscope is a mechanical device used to project the sounds associated with the heart, arteries, and veins and other internal organs.

Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in 870.9.

DQD / 870.1875
Electrophoresis Apparatus (22 suppliers)

Identification. An electrophoresis apparatus for clinical use is a device intended to separate molecules or particles, including plasma proteins, lipoproteins, enzymes, and hemoglobulins on the basis of their net charge in specified buffered media. This device is used in conjunction with certain materials to measure a variety of analytes as an aid in the diagnosis and treatment of certain disorders.

Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in 862.9.

JJN / 862.2485
Electrophoresis Instrumentation (15 suppliers)

Identification. Immunoelectrophoresis equipment for clinical use with its electrical power supply is a device used for separating protein molecules. Immunoelectrophoresis is a procedure in which a complex protein mixture is placed in an agar gel and the various proteins are separated on the basis of their relative mobilities under the influence of an electric current. The separated proteins are then permitted to diffuse through the agar toward a multispecific antiserum, allowing precipitation and visualization of the separate complexes.

Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in 866.9.

JZS / 866.4500
Electrophoresis of Glucose-6-phosphate Dehydrogenase (1 supplier)

Identification. An erythrocytic glucose-6-phosphate dehydrogenase assay is a device used to measure the activity of the enzyme glucose-6-phosphate dehydrogenase or of glucose-6-phosphate dehydrogenase isoenzymes. The results of this assay are used in the diagnosis and treatment of nonspherocytic congenital hemolytic anemia or drug-induced hemolytic anemia associated with a glucose-6-phosphate dehydrogenase deficiency. This generic device includes assays based on fluorescence, electrophoresis, methemoglobin reduction, catalase inhibition, and ultraviolet kinetics.

Classification. Class II (performance standards).

JBM / 864.7360
Electrophoretic Glucose-6-Phosphate Dehydrogenase Isoenzymes (1 supplier)

Identification. An erythrocytic glucose-6-phosphate dehydrogenase assay is a device used to measure the activity of the enzyme glucose-6-phosphate dehydrogenase or of glucose-6-phosphate dehydrogenase isoenzymes. The results of this assay are used in the diagnosis and treatment of nonspherocytic congenital hemolytic anemia or drug-induced hemolytic anemia associated with a glucose-6-phosphate dehydrogenase deficiency. This generic device includes assays based on fluorescence, electrophoresis, methemoglobin reduction, catalase inhibition, and ultraviolet kinetics.

Classification. Class II (performance standards).

JLM / 864.7360
Electrophoretic Hemoglobin Analysis System (6 suppliers)

Identification. An electrophoretic hemoglobin analysis system is a device that electrophoretically separates and identifies normal and abnormal hemoglobin types as an aid in the diagnosis of anemia or erythrocytosis (increased total red cell mass) due to a hemoglobin abnormality.

Classification. Class II (performance standards).

JBD / 864.7440
Electrophoretic Separation, Vanilmandelic Acid (1 supplier)

Identification. A vanilmandelic acid test system is a device intended to measure vanilmandelic acid in urine. Measurements of vanilmandelic acid obtained by this device are used in the diagnosis and treatment of neuroblastoma, pheochromocytoma, and certain hypertensive conditions.

Classification. Class I (general controls). The device is exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to 862.9.

CDK / 862.1795
Electrophoretic, Lactate Dehydrogenase Isoenzymes (6 suppliers)

Identification. A lactate dehydrogenase isoenzymes test system is a device intended to measure the activity of lactate dehydrogenase isoenzymes (a group of enzymes with similar biological activity) in serum. Measurements of lactate dehydrogenase isoenzymes are used in the diagnosis and treatment of liver diseases, such as viral hepatitis, and myocardial infarction.

Classification. Class II.

CFE / 862.1445
Electrostatic Discharge Device (For Pain Relief) (2 suppliers)NHH
Electrostatic X-Ray Imaging System (10 suppliers)

Identification. An electrostatic x-ray imaging system is a device intended for medical purposes that uses an electrostatic field across a semiconductive plate, a gas-filled chamber, or other similar device to convert a pattern of x-radiation into an electrostatic image and, subsequently, into a visible image. This generic type of device may include signal analysis and display equipment, patient and equipment supports, component parts, and accessories.

Classification. Class II.

IXK / 892.1630
Electrosurgical and Coagulation Unit with Accessories (13 suppliers)

Identification. An electrosurgical cutting and coagulation device and accessories is a device intended to remove tissue and control bleeding by use of high-frequency electrical current.

Classification. Class II.

BWA / 878.4400
Electrosurgical Apparatus (22 suppliers)

Identification. An electrosurgical cutting and coagulation device and accessories is a device intended to remove tissue and control bleeding by use of high-frequency electrical current.

Classification. Class II.

HAM / 878.4400
Electrosurgical Coagulation For Aesthetic (3 suppliers)ONQ
Electrosurgical Cutting and Coagulation Device (282 suppliers)

Identification. An electrosurgical cutting and coagulation device and accessories is a device intended to remove tissue and control bleeding by use of high-frequency electrical current.

Classification. Class II.

GEI / 878.4400
Electrosurgical Devices (15 suppliers)

Identification. An electrosurgical cutting and coagulation device and accessories is a device intended to remove tissue and control bleeding by use of high-frequency electrical current.

Classification. Class II.

DWG / 878.4400
Electrosurgical Electrode (57 suppliers)

Identification. An electrosurgical cutting and coagulation device and accessories is a device intended to remove tissue and control bleeding by use of high-frequency electrical current.

Classification. Class II.

JOS / 878.4400
Electrosurgical Electrode Gel (8 suppliers)

Identification. An electrosurgical cutting and coagulation device and accessories is a device intended to remove tissue and control bleeding by use of high-frequency electrical current.

Classification. Class II.

JOT / 878.4400
Electrosurgical Patient Return Electrode (4 suppliers)ODR
Eletric/Pneumatic ENT Surgical Saw (13 suppliers)EWQ / 874.4420
Elution Discs (1 supplier)

Identification. An antimicrobial susceptibility test disc is a device that consists of antimicrobic-impregnated paper discs used to measure by a disc-agar diffusion technique or a disc-broth elution technique the in vitro susceptibility of most clinically important bacterial pathogens to antimicrobial agents. In the disc-agar diffusion technique, bacterial susceptibility is ascertained by directly measuring the magnitude of a zone of bacterial inhibition around the disc on an agar surface. The disc-broth elution technique is associated with an automated rapid susceptibility test system and employs a fluid medium in which susceptibility is ascertained by photometrically measuring changes in bacterial growth resulting when antimicrobial material is eluted from the disc into the fluid medium. Test results are used to determine the antimicrobial agent of choice in the treatment of bacterial diseases.

Classification. Class II (performance standards).

LTX / 866.1620
Embedding Container (17 suppliers)

Identification. Tissue processing equipment consists of devices used to prepare human tissue specimens for diagnostic histological examination by processing specimens through the various stages of decalcifying, infiltrating, sectioning, and mounting on microscope slides.

Classification. Class I (general controls). These devices are exempt from the premarket notification procedures in subpart E of part 807 of this chapter subject to the limitations in 864.9. The devices are also exempt from the current good manufacturing practice requirements of the quality system regulation in part 820 of this chapter, with the exception of 820.180, with respect to general requirements concerning records, and 820.198, with respect to complaint files.

KER / 864.3010
Embolectomy Catheters (38 suppliers)
Embolectomy catheters offer simple, rapid removal of emboli and thrombi from the arterial system. These embolectomy catheters are indicating for the removal of fresh, soft emboli and thrombi from vessels in the arterial system.

Identification. An embolectomy catheter is a balloon-tipped catheter that is used to remove thromboemboli, i.e., blood clots which have migrated in blood vessels from one site in the vascular tree to another.

Classification. Class II (performance standards).

DXE / 870.5150
Embolic Agents For Treatment Of Uterine Fibroids (4 suppliers)NAJ / 870.3300
Embolic Injectable Agent (4 suppliers)MFE
Emergency Airway Needle (6 suppliers)

Identification. An emergency airway needle is a device intended to puncture a patient's cricothyroid membrane to provide an emergency airway during upper airway obstruction.

Classification. Class II (performance standards).

BWC / 868.5090
51 to 100 of 2376 results  Page: << Previous 50 Results 1 [2] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 >> Next 50 Results
Browse Category   |   Alphabetical Products   |   ALL 25,000 Suppliers
HomeBuyAdd FREE ListingAdvertise Medical CompanyMedical Portal